伺服电机自动剪线横筒式绷缝机(附后拖轮装置)
Servo motor cylinder bed interlock sewing machine with automatic trimmer and rear puller device
RP-单向式后拖轮组 (RP-A表示齿 轮，RP-B表示平轮)
加长下滚轮长度，使送布稳定，降低故障率，更换 容易，不因速度快慢，产生大小针。
RP-A Single direction rear puller device( gear type) RP-B rear puller device (flat type)
To extend the length of lower feed roller. To offer you more stable feeding, low breakdown and easy to repair. The machine speed don’t disturb the stitch length
RP-B平轮组
平轮胶轮采用特殊材料制造，不易磨损，薄料不会有印痕。
RP-B flat type rear puller
the flat rubber wheels is made of special materials, which is not easy to wear and tear and no printing mark on thin materials.
上剪线装置(专利设计)
专利精心设计，气动式切线刀组，各种角度调整简 便，上剪小刀头勾线、剪断、夹线动作一气呵成， 干净利落精准稳定。
Upper thread trimming device (patented design)
Precise Patent design, electrical thread trimmer, easy to adjust from different angles, can catch, cut and clamp the thread smoothly together with stable performance
适用于各式内衣裤、运动服接缝及折下摆车缝等。
Applicable to medium-heavy weight fabric for general seaming and hemming. For example, all kinds of underwear, sportswear for covering and hemming…etc.
| 最高缝制速度 Maximum Sewing Speed | 5500 rpm |
| 线距 Stitch Length | 1.4-4.5MM |
| 差动比 Differential Feed Ratio | 1：0.7 - 1：2 |
| 抬压脚高度Foot Lift Height | 7MM |
| 针间距 Needle Spacing | 5.6MM/6.4MM |
| 电动剪线 Air Thread Trimming | Yes |
| 电动抬压脚 Pneumatic Presser Foot Lift | Yes |
| 带后拖轮 With Rear Puller | with Rear Puller (A: Gear Wheel, B: Flat Pulley) |
| 带面剪装置 With Face-Thread Trimmer | Yes |
| 名称 Model | 787EST/EWT |
| 毛重 Gross Weight (G.W.)/kg | 55.2 |
| 净重 Net Weight (N.W.)/kg | 45.3 |
| 纸箱尺寸/CM Carton Dimensions/CM | 73.5*40.5*63 |
| 体积/CBM Volume/CBM | 0.188 |
| 台板/kg Table Top/kg | 26 |
| 台板尺寸 Table Top Dimensions | 123.5*59*10 |